Industrial Valves

We fabricate an exclusive range of check valves to meet the various requirements of our clients in the national and international markets. Fabricated using superior grades of raw material these check valves are catered to several industries. These check valves allow flow in one direction and restrains flow in opposite direction. Opened by the force of velocity pressure and closed by the force of gravity and back pressure are widely appreciated for optimum performance. Swing check valves designed for horizontal installations are extensively used for moderate velocity operations. It can even be installed in vertical direction with flow in upward direction under the disc. These heavy duty, bolted cover, renewable seat ring, and body mounted disc swing type valves are highly acclaimed. 

Features: 

• Has economic flow control
• Available in wide range of sizes and weights
• Marked with flow direction for easy installation
• Flow directions are marked on the body for ease of installation
• Adequate swing check valves
• Valves are provided with counter weights and dash pot arrangement

Product Range:

Size Range	Class
2" - 36"	Class 150
2" - 24"	Class 300
2" - 24"	Class 600
2" - 12"	Class 900
2" - 12"	Class 1500
2" - 12"	Class 2500

Standards:

Design Standard	BS 1868
Testing Standard	BS EN 12266 - 1
Face To Face	ASME B 16.10
End Connection	Flanged End - ASME B 16.5
	Butt Weld End - ASME B 16.25
Pressure - Temperature Chart	ASME B 16.34

Material

STRUCTURE	End Connection	Flanged End Raised Face, Butt Weld End, RTJ,. ETC
MATERIAL	Shell	WCB, WC1, WC6, WC9, LCB, LCC, LC3, C5, C12, CF8, CF8M, CF3, CF3M, CF8C, CN7M, CD4MCu, Hastelloy, Inconel, Duplex Stainless Steel
	Trim	13% Cr Steel, 304 , 304L, 316, 316L, 321, 347, F51, Monel

PP ball valves manufactured by us are known to be chemically resistant to most of aggressive chemicals and economically compared to solid PVDF ball valve and Teflon lined metallic valves.
These valves are being light in weight and are considered to be a better option as compared to G.I. or Cast Iron Valves.

Specifications:

•  Design:  API 6D/ BS 5351
•  Testing:  API 598/ BS 5146/ BS 6755
•  Fire Safe: API 607/ API 6FA/ BS 6755-II
•  Flange end: ANSI B 16.5/ BS 10/ DIN
•  SW End: ANSI B 16.11
•  BW End: ANSI B 16.25
•  Screwed End: ANSI B 1.20.1/ ANSI B 2.1
•  Face to Face: ANSI B 16.10/ DIN
•  MOC: WCB/CF 8/CF 8M/CF 3/CF 3M/CN 7M
•  Size: 15 MM TO 600 MM

Application Areas

• Chemical plants
• Sugar
• Paints 
• Varnish
• Breweries
• Distilleries
• Water Works
• Automobile
• Agriculture
• Food and Dairy Industries

We offer gate valves that are also known as slide or knife valves. In these linear motion valves flat closure element slides in to the flow stream to provide shut-off. Fabricated from quality material it is corrosion and heat resistant. Designed with excellence, these are suitable for high density slurry lines. Simple to operate and handle, our range is customized as specified by the client.

• Design:  API 600/ BS 1414
• Testing:  API 598
• Flange End: ANSI B 16.5
• W End: ANSI B 16.25
• Face to Face: ANSI B 16.10
• MOC: WCB/ WC6/ WC9/ CF 8/ CF 8M/ CF 3/ CF 3M/ CN 7M
• Size: 15 MM TO 600 MM
• Options: Gear Operated

We fabricate an exclusive range of Check Valves that allows flow in one direction and restrains flow in opposite direction. Designed for horizontal installations for moderate velocity operations and vertical installations with flow in upward direction under the disc. Applicable in various industries such as oil, chemical, textiles and many more, the range of valves are custom designed as required by the client.

Specifications:

•  Design: API 6D / BS 1868
•  Testing: API 598 / BS 6755 PART I
•  Flanges End: ANSI B 16.5
•  BW End: ANSI B 16.25
•  Face to Face: ANSI B 16.10
•  MOC: WCB/ WC6/ WC9/ CF 8/ CF 8M/ CF 3/ CF 3M/ CN 7M
•  Size: 15 MM TO 600 MM

The range of butterfly valves offered by us is used for several mechanical purposes in various industries. These are used to regulate the flow of fluids through a series of pipes. These valves are also applicable in larger lines as front and rear suctions and in fire apparatus. Used for special applications like throttling, isolation and control, the valves are suitable for fluids like acid, chemicals, slurries and combination of solid and gases. Applicable in various industries, our range is also customized as specified by the client.

Specifications:

•  Design: API 609/ BS 5155
•  Testing: BS 6755
•  End Connection: Wafer/Lug/Double Flange
•  MOC: CI/WCB/CF 8/CF 8M/CF 3/CF 3M/AL. Bronze
•  Lining: NBR/EPDM/Viton/Silicon/Neoprene/PTFE
•  Size: 40 MM TO 700 MM

2 Valve manifold pipe to flange design for separate mounting. Connecting system impulse lines and transmitters. Having simple two valve configuration which allows for easy block, bleed & calibration of a static pressure transmitter or gauge.

Features :

316 S.S. Body construction for superior corrosion resistance. Non rotating VEE tip prevents galling & promotes repetitive shut-off. Optional graphoil packing material is available for high temp. rating 1000° F @ 6000 PSI

Testing :

Pneumatic Test : Each valve is tested with nitrogen at 100 Psi in accordance with MSS - SP- 61 for seat & Packing leakage. Hydro Test : Performed with pure water in accordance with MSS-SP-61. Body tested at 1.5 times & seat leakage tested at 1.1 times of the working pressure.

Design Standard :

• Pressure & Temperature rating are selected from ANSI B16.34
• Standard class valves based on ANSI B16 - Class 2500
• Optional sour gas service confirms to NACE Std. MR-01-75

We supply needle valves using finest grade of raw materials and as per the international quality standards like  ASTM, IS, BS, ASME, DIN and more. These valves are available in different sizes, end connections and sealing styles. Designed to be used with instrumentation equipment, needle valves are used for controlling, measuring, equalizing and draining the pressure of fluids (gases and liquids). Constructed using materials like steel, stainless steel (in different grades), brass, monel, hastelloy, inconel, titanium etc. These valves can be customized as per the specifications of the clients.

Features :
BSI 3 Valve manifold T- type pipe to flange connection design for connecting system impulse lines and transmitters. This manifold consists to ½' NPT female connections on 54mm (2-18') centers and of the equalizer valve and two block valves ¼' NPT purge connections are optional.

Physical Features :

316 S.S. Body construction for superior corrosion resistance. Non rotating VEE tip prevents galling & promotes repetitive shut-off. Optional graphoil packing material is available for high temp. rating 1000° F @ 6000 PSI

Testing :

Pneumatic Test : Each valve is tested with nitrogen at 100 Psi in accordance with MSS - SP- 61 for seat & Packing leakage. Hydro Test : Performed with pure water in accordance with MSS-SP-61. Body tested at 1.5 times & seat leakage tested at 1.1 times of the working pressure.

Design Standard :

• Pressure & temperature rating are selected from ANSI B16.34
• Standard class valves based on ANSI B16 - Class 2500
• Optional sour gas service confirms to NACE Std. MR-01-75

We are involved in manufacturing and exporting a wide range of five valve manifolds, which is known for sturdy construction and high performance. These are used for connecting system impulse lines & transmitters. The five valve manifolds are rated for pressures as high as 6000 PSI at 200⁰ f or 4000 psi at 500⁰ f with PTFE packing. Further, for a higher temperature grafoil packing is used.

This manifold consists:

• 1/2" NPT (F)
• Pipe to flange or flange to flange connections on 54mm (2 1/8") centers,
• One equalizer valve, two block valves
• One bleed valve and 2 nos 1/4" NPT(F) purge (Vent) connections